Vanair Air N Arc All-in-One Power Systems 300, Руководство по эксплуатации и список запасных частей

Страница: 29 / 204

AIR N ARC
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
SECTION 1: SAFETY
090010-OP_r0
PAGE - 11
1.5.3 MOVING PARTS CAN CAUSE INJURY
Keep away from fans, belts, and rotors.
Keep all doors, panels, covers, and
guards closed and securely in place.
Stop engine before installing or
connecting unit.
Have only qualified people remove doors, panels, covers,
or guards for maintenance and troubleshooting as
necessary.
Disconnect negative ( − ) battery cable from battery to
prevent accidental starting during servicing.
Keep hands, hair, loose clothing, and tools away from
moving parts.
Reinstall doors, panels, covers, or guards when servicing
is finished and before starting engine.
Before working on generator, remove spark plugs or
injectors to keep engine from kicking back or starting.
Block flywheel so that it will not turn while working on
generator components.
1.5.4 HOT PARTS CAN CAUSE SEVERE BURNS
Do not touch hot parts bare handed.
Allow cooling period before working on
equipment.
1.5.5 ENGINE EXHAUST GASES CAN KILL
If used in a closed area, vent engine
exhaust outside and away from any
building air intakes.
1.5.6 ENCLOSED SPACES CAN CAUSE A
BUILD-UP OF NOXIOUS FUMES AND
OVERHEATING
Do not use in enclosed spaces where
deadly exhaust gases can build up and
machine can overheat, causing fire.