Vanair 050817, Руководство по эксплуатации и список запасных частей

Страница: 44 / 184

SECTION 2: DESCRIPTION AIR N ARC
®
200 SERIES ALL-IN-ONE POWER SYSTEM
®
page - 22 090019-OP_r0
2.1 GENERAL DESCRIPTION
Vanair
®
Manufacturing, Inc.’s Air N Arc 200 Series All-In-
One Power System offers superior performance and
reliability, as well as limited maintenance requirements.
The Power System package is designed to provide
compressed air, DC welding output, AC power, and
battery boosting/charging in one easy to use interface.
This section of the manual provides brief descriptions of
the components and systems on the Air N Arc 200 Series
All-In-One Power System package. See
Figure 2-1 for a
quick visual guide to the Power System’s main
component locations.
2.2 COMPRESSED AIR SYSTEM
2.2.1 COMPRESSOR UNIT
See Figure 2-2 . The compressor is a reciprocating, two-
stage, cast iron unit built for long-lasting durability, and
designed to operate in a harsh industrial environment.
With proper maintenance it should provide years of
reliable service.
The air compressor is constantly in operation when the
machine is on. Therefore, it provides a constant supply of
NOTE
Refer to the Maintenance Section of this
manual for adjustment and replacement
procedures.
System Component or
Component Group
Manual
Section
Location
COMPRESSED AIR SYSTEM 2.2 page 22
Compressor Unit 2.2.1 page 22
Air Intake / Air Filter 2.2.2 page 23
Pressure Relief Valve 2.2.3 page 24
Pilot Valve 2.2.4 page 24
SECTION 2: DESCRIPTION
Figure 2-2: Compressor Unit
NOTE
Read this manual before operating or
servicing this equipment. Failure to
comply with the operation and
maintenance instructions in this manual
WILL VOID THE EQUIPMENT WARRANTY.
This manual should be read in
conjunction with other appropriate
supplied manuals, such as the Engine
Operator’s manual, or Generator
Operator’s manual.
NOTE
Refer to the Engine Operator’s Manual for
service and maintenance
recommendations that are not provided in
this manual.