Vanair 050817, Руководство по эксплуатации и список запасных частей

Страница: 179 / 184

AIR-IN-ARC 200 ALL-IN-ONE POWER SYSTEM APPENDIX B: MAINTENANCE & SERVICE LOG
090019-OP_r0 PAGE - 157
B.1 GENERAL DESCRIPTION
The maintenance and service log given in this appendix
can be used to track and keep a record of the
maintenance intervals of the machine, as well an any
non-routine repairs or changes made, throughout the
productive life of the machine package.
The service log generally gives two types of login periods
of operation—by hours, and by date intervals. Service
should adhere to whichever occurs first between the two
types.
Keeping such a record is extremely beneficial when
considering a solution to any troubleshooting problem
that might occur. For additional assistance in setting up a
routine and orderly schedule to track machine
maintenance and repair, refer to
Section 6,
Maintenance , and particularly Section 6.3,
Maintenance Schedule Table .
For procedure on ordering parts, consult Section 9,
Parts Ordering Procedure , Table 9A - Recommended
Spare Parts List , and Appendix A, Section A.5, Air N
Arc 200 Series All-In-One Power System Available
Options List
.
If a part needs to be replaced, but is not listed in any of
the above sections, it can readily be identified visually by
scanning through the various parts list sub-sections of
Section 9, Illustrated Parts List . The various parts list
sections identify each part by its individual part number,
which in turn can be used to order any part that needs to
be replaced.
APPENDIX B:
MAINTENANCE AND SERVICE LOG
NOTE
When determining a service schedule,
always take into account the type of
environmental conditions where the
machine will be operating. Extreme
working conditions will usually mean
lessening the intervals between service
checks. For more information, consult
Section 5.8, Extreme Condition
Operation , and its sub-sections.