Vanair 050518, Руководство по эксплуатации и список запасных частей

Страница: 124 / 210

SECTION 7: TROUBLESHOOTING AIR IN ARC
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
PAGE - 106 090012-OP_r0
7.2 TROUBLESHOOTING GUIDE
Fault/Malfunction Possible Cause Corrective Action
ENGINE
Engine will not crank Faulty battery connection. Check for proper battery connections and
battery charge.
Battery out of power Recharge or replace battery.
Engine fuse blown Check engine fuse: See Section 6.7,
Servicing the System Fuses and Circuit
Breakers
, and/or consult the Engine
Operator’s Manual.
Engine will not start Low fuel and/or oil supply Check fuel gauge. Check engine oil level;
refer to
Section 6.6.12, Checking the
Engine Oil . Replenish as necessary.
Consult the Engine Operator’s Manual for
additional information on engine
maintenance.
Pinched fuel line Replace or reroute if necessary.
Plugged fuel filter(s) Replace if necessary. Refer to Section 2.4,
Engine , and the Engine Operator’s Manual
for additional information on engine
maintenance.
Low battery voltage Recharge or replace if necessary.
Loose connections; tighten connections.
Dirty connections; clean connections.
Plugged engine air filter Replace engine air filter. Refer to Engine
Operator’s Manual.
Defective oil pressure switch Check continuity, and replace if necessary.
Defective engine temperature switch Check continuity, and replace if necessary.
Poor ground connection Check and clean/renew connection.
Machine hood shutdown safety switch
prevents start-up of engine Close hood panel or check if roof switch is
faulty. See
Section 1.11, Machine Canopy
Access Safety Switch .
Improper Control Operation:
Engine does not speed up Throttle solenoid stuck Lubricate; replace throttle solenoid if
necessary.
Governor stuck Free governor and lubricate if necessary.
Fuel filter partly plugged Replace fuel filter. Refer to Section 2.4,
Engine , and the Engine Operator’s Manual.
Continued on next page