INSTRUCTION MANUAL
vM PFM2
POWERLINE FILTER
1
In this instruction manual you find everything important to connect and use the
vM PFM2. Read this manual before installation. Overall information and/or features
you will find in the brochure or on our website.
Precautions
Connections
Maintenance and advice
Technical specifications
ONLY connect the filter to a (professionally installed) wall socket with earth or ground and
the corresponding voltage setting, as indicated on the back. Any faulty connection will
invalidate the warranty and may cause irreversible damage.
The filter is protected against overload with a 5 Amp. slow blow fuse. If it is necessary to
replace the fuse, use only fuse(s) with the exact same type and value.
Never locate this filter in a moist area or room.
Don’t place the filter close to or on sensitive audio equipment and signal cables.
Magnetic radiation can cause hum. The degree of action of this unpleasant phenomenon
is directly dependent on the load.
Do not put any magnetic devices near or on top of the filter, e.g. audio tapes or bank
cards. This can cause irreparable damage to such items.
If you experience any problems, always contact your nearest authorized Van Medevoort
dealer or distributor.
