Valx WSM DRUM, Руководство по ремонту, Страница: 18 / 68

18 WSM_2051-04
4 Tightening torques
NOTE
Always tighten or check the fasteners with a calibrated torque wrench.
1
5
3 2
6
4
1
Torques
Subassembly Chapter Item Size Width across flats Inspection When replacing
Brake system 7 1 Dust cover bolt M8 13 20 Nm 22 Nm ± 4 Nm
2 Brake cylinder nut M16 x 1.5 24 175 Nm 210 Nm – 30 Nm
1
3 Set nut yoke M16 x 1.5 24 60 Nm 65 Nm ± 4 Nm
1
4 Ball bearing nut M8 13 20 Nm 22 Nm ± 4 Nm
Wheel hub unit 8 5 Central nut M55 x 1.5 75 N.A. 630 Nm ± 30 Nm
6 Wheel nuts M22 x 1.5 32 600 Nm 630 Nm ± 30 Nm
1
The torque refers to WABCO brake cylinders. If other brake cylinders are used, the brake cylinder nuts must be
tightened to the torque specified by the supplier.