Valueline 2913181, Руководство пользователя

Страница: 59 / 84

Startup and Operation
2637_en_D PHOENIX CONTACT
3-35
6. Click the “Finish” button to return to the “Power Options Properties… UPS” dialog box.
Figure 3-38 “Power Options Properties” dialog box
7. Click the “Configure” button.
8. The suggested configuration of the driver is as follows:
– Click the “Enable all notifications” check box to display a message when the VL IPC
goes to battery power.
– Set the number of seconds before the first message displays to 5 seconds. This
prevents false alarms if the power supply drops out of the operating range for a short
time.