Value AB70, Руководство пользователя

Страница: 14 / 20

Page 10
C. Maximum Load Test
Warning
• Make sure the car brake is not released during test.
• Never stand in front of the car during test.
• Keep the transmission in idle position. Never shift to D or R
positions.
This test is target on the battery power during maximum load.
1) Start the car engine;
2) Connect the red and black clips to the
battery;
3) The Tester will automatically switch on;
4) Press to select this function;
5) Press to start the test. The testing
period is 90s. Within this time, increase
the engine speed to 2500-3000rpm;
6) After the test is completed, the test result (Charging Voltage and
state of charge) will be shown on the display.
Note :
If charging voltage is smaller than 12.8V for 12V battery, or smaller
than 25.6V for 24V battery, check the drive belt and the wires
conditions.
D. Engine Start Test
Warning
• Make sure the car brake is not released during test.
• Never stand in front of the car during test.
• Keep the transmission in idle position. Never shift to D or R
positions.
STD
TYPE
>
v