manualshive.com logo in svg

Valtra Versu N Series, Руководство оператора

Поделиться
Скачать
Valtra Versu N Series Скачать руководство пользователя страница 306

2. Press the QuickSteer activation button to activate the steering valve.

The QuickSteer activation button light is lit green, and the QuickSteer symbol

is displayed on the Proline instrument panel. When using QuickSteer, do not

turn the Auto-Guide steering valve on.

3. Turn the QuickSteer control knob to set the steering speed.
To deactivate the QuickSteer, press the QuickSteer activation button again.

3.23.3 

Auto-Guide with TwinTrac and QuickSteer

You can use Auto-Guide 3000 also with the TwinTrac reverse drive system.
Turning the driver's seat to the TwinTrac position turns the steering valve on. You

cannot turn the steering valve off when using TwinTrac.
You can use either normal steering or QuickSteer to steer the tractor.
Turning the driver's seat to normal position turns the steering valve off.
You can turn the steering valve back on by pressing the Auto-Guide steering

valve on/off button or the QuickSteer activation button.

3.23.4 

Resetting the Auto-Guide steering valve

If the light on the Auto-Guide steering valve on/off button is flashing, there is a

fault in the steering valve. The fault code is shown on the tractor terminal. Reset

the steering valve to recover from the fault.
•

Press the steering valve on/off button once.
The steering valve is turned off after which the system turns the valve back

on.
If the light is still flashing, the fault persists. In this case, contact an

authorised Valtra workshop.

3.24 

Towing devices

3.24.1 

Nordic pick-up hitch

The Nordic pick-up hitch is optional with the fixed trailer hitch.

WARNING: When attaching a trailer or implement, do not exceed the

maximum weight of the rear axle or the maximum load of the tyre type.

See the technical specifications in this manual for the maximum

permissible weights and loads.

WARNING: Make sure that the maximum permissible towable mass is

not exceeded. Check the tractor identification plate for permissible

towable mass. Follow valid laws and regulations.

3. Operation

- 304 -

Содержание Versu N Series







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды