manualshive.com logo in svg

Valtra T series Versu, Руководство оператора, Страница: 348 / 450

Поделиться
Скачать
Valtra T series Versu Скачать руководство пользователя страница 348

4.7.4.12  Changing the hydraulic system oil filter

Change the hydraulic system oil filter periodically.

1

GUID-30D8DDE0-BEFD-456A-A43D-F2417807647E

1. Return oil filter of the auxiliary hydraulic system

Oil filters are located on the right side of the tractor under the cab. The return oil

filter is labelled with the text HYD on the mounting piece on top of it.
1. Fit a suitable container under the filter.
2. Clean the filter housing and the surrounding area.
3. Remove the filter housing and the filter element.
4. Wash the filter housing in clean diesel fuel.
5. Lubricate the seal of the new filter element.
6. Fit the new element into place.
7. Refit the filter housing.

Screw in the housing fully by hand and then unscrew by one quarter-turn.

4. Maintenance

- 347 -

Содержание T series Versu



































































































































































































































































































































































































































































Отзывы:

Нет отзывов