manualshive.com logo in svg

Valtra T series Versu, Руководство оператора, Страница: 332 / 450

Поделиться
Скачать
Valtra T series Versu Скачать руководство пользователя страница 332

4.7.3.13  Checking the emergency brake

Check the emergency brake periodically.
1. Use the emergency brake to check that it is functioning.

You can test the emergency brake in a normal braking situation.

WARNING: Check the emergency brake in slow driving speed

(approximately 10 km/h). Using the emergency brake can lead to

wheels locking up.
WARNING: Using the emergency brake releases traction.

2. Adjust the parking brake, if necessary.

Normally there is no need for adjusting, because the parking brake is

adjusted, when the drive brakes are adjusted.

4.7.3.14  Checking the windscreen washer fluid amount

Check the windscreen washer fluid amount periodically.

1

GUID-0BF7B924-C361-4C82-AA78-5291D6EBCD87

1. Cap of the windscreen washer fluid reservoir

The washer fluid reservoir is common for the front, rear, and side window

washers. The rear and side window washers are extra equipment.

4. Maintenance

- 331 -

Содержание T series Versu



































































































































































































































































































































































































































































Отзывы:

Нет отзывов