Valtra T series Versu, Руководство оператора

Страница: 106 / 450

at a time by moving the gear lever in either direction and holding it there, which
triggers multiple consecutive Powershift gear changes. The number of the
selected Powershift gear blinks on the tractor terminal display and A-pillar display
until the requested Powershift gear has engaged.
NOTE: When turning the power on when it has been switched off for over 10
seconds, the Powershift is always in the lowest stage.
1
2
OFF
ON
OFF
AU
TO
CONTR
OL
1
GUID-8827DB93-3F9A-42D2-B8D4-55A8DB96E7B3
1. Gear lever
• To increase the Powershift gear, move the gear lever forward.
• To decrease the Powershift gear, move the gear lever backward.
The Powershift gear number flashes on the tractor terminal display and on the A-
pillar display until the change process is completed.
NOTE: If shifting down the Powershift gear would increase the engine speed
beyond acceptable limits, the system will prevent the gear change.
NOTE: If shifting down the Powershift gear increased the engine speed beyond
acceptable limits, the system prevents the gear change.
3.8.11.5 Preprogramming gear for driving direction changing
You can preprogram the wanted Powershift gear to engage automatically when
changing driving direction.
For example, when working with the front loader and changing the direction to
forwards, Powershift 1 can be engaged, and when changing the direction to
backwards, Powershift 3 can be engaged.
3. Operation
- 105 -