manualshive.com logo in svg

Valtra HiTech T3 Series, Руководство оператора

Поделиться
Скачать
Valtra HiTech T3 Series Скачать руководство пользователя страница 202

STOP

STOP

1

GUID-4A7A6F82-ED2C-4C80-A9EB-F55C8B38EDD8

1. PTO emergency stop socket

•

To stop the PTO from inside the cab, push the speed control lever for rear

power take-off (PTO) towards the side panel to deactivate the PTO.

•

To restart the PTO:

•

Activate the PTO speed range by the speed control lever for rear PTO.

•

Start the PTO by the rear PTO switch.

•

To stop the PTO from outside the cab, pull out the PTO emergency stop socket.

•

To restart the PTO after stopping it from the PTO emergency stop socket:

•

Plug in the PTO emergency stop socket.

•

Stop the tractor and turn off the power.

•

Turn on the power and restart the tractor.

•

Restart the PTO.

3.17.2.7  Using the rear power take-off automatic stop

The rear power take-off (PTO) automatic stop is useful in headland turns, for

example, where the implement needs to be raised temporarily and then lowered

back again.

1

AUTO

AUTO

MIN

MAX

P 

GUID-846FFA32-38CB-4976-937F-F2A23ED260C2

1. Switch for the rear PTO automatic stop

3. Operation

- 201 -

Содержание HiTech T3 Series



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды