background image

1

GUID-F32C777A-A48D-48B2-BBD4-858DE35A95F6

1. Rear power take-off speed

The PTO rotation speed is shown beside the symbol with an accuracy of 10 rpm.

3.9.3.6 

Front power take-off speed view

The front power take-off (PTO) speed is shown in revolutions per minute (rpm).

The front PTO speed   is shown on the top or middle row of the display.

1

F

GUID-E1036BD6-BD06-43A1-81C1-BD4E4F418106

1. Front power take-off speed

The PTO rotation speed is shown beside the symbol with an accuracy of 10 rpm.

3.9.3.7 

Engine speed view

The engine speed is displayed in revolutions per minute (rpm).
The engine speed   is shown on the top or middle row of the display.

1

GUID-511B2E41-FE90-48DA-93FB-FA4FEB77A712

1. Engine speed

The view shows the engine speed with an accuracy of 10 rpm.

3.9.3.8 

Fuel consumption views

The display shows different kinds of fuel consumption: immediate and average

fuel consumption on the area worked, immediate and average fuel consumption

in an hour and total fuel consumption.
The fuel consumption is shown on the top or middle row of the display.
You can change the unit of area (ha, acre) by changing the unit of length.
You can select litre, gallon UK or gallon US as the unit of volume.

3. Operation

- 130 -

Содержание HiTech T3 Series



















































































































































































































































































































































































Отзывы: