manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора, Страница: 256 / 370

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 256

4.7.3.6 

Greasing the brake cam

Use Calsium LF grease when greasing the brake cam.

1

2

2

2

STOP

GUID-D72414A3-ABC1-4CFB-B33A-9DCDC2B16F70

1. Grease nipple

2. Sliding surfaces

1. Grease the nipples on both sides of the brake cam.
2. Grease the sliding surface on the brake mechanism.

4.7.3.7 

Greasing front axle mounting bearings

You must grease the front axle mounting bearings regularly.
Use Universal Grease when greasing.

1

1

GUID-3BD9A390-1A3A-4223-B695-1A94ECBF76FD

1. Greasing nipples

1. Lift the front end of the tractor a little.

Do not lift from front axle or front weight bracket

2. Grease the nipples on both bearings.

Tilt the axle to make sure that grease goes equally into the bearings.

4. Maintenance

- 255 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов