manualshive.com logo in svg

Valtra HiTech T133 H, Руководство оператора

Поделиться
Скачать
Valtra HiTech T133 H Скачать руководство пользователя страница 232

3.22 

Trailer

Several factors affect the compatibility of a trailer.
The type of trailer that can be connected to the tractor depends, among other

things, on:
•

The braking power of the tractor.

•

Whether the trailer has brakes.

•

How much of the trailer weight is on the hitch.

•

Whether the trailer has one or more axles.

The total trailer weight is the load added to the empty trailer weight.
When loading the hitch, at least 20% of the tractor weight has to be on the front

wheels.
The maximum allowed wheel or hitch loading must not be exceeded.

WARNING: If the pick-up hitch is worn out or otherwise damaged so

that the drawbar eye can come off the pick-up hitch, the hook must be

replaced.

3.22.1 

Trailer air pressure brakes

When towing a trailer, you can increase the braking power with trailer air

pressure brakes.
The trailer air pressure brake system (extra equipment) is controlled by the

tractor brakes. The trailer brakes operate also when using the parking brake.

1

4

2

3

GUID-AAE43069-A1E8-465B-BFF9-DFF03DAB579D

1. Brake line coupling with yellow cover

2. Pressurised air quick coupling

3. Brake line coupling with black cover

4. Container line coupling with red cover

On a two-hose system, the trailer is connected to two couplings:
•

Container line with a red cover

•

Brake line coupling with a yellow cover

On one-hose systems, the trailer is connected to the brake line coupling with a

black cover.
The Duo-Matic system has only one coupling to connect.

3. Operation

- 231 -

Содержание HiTech T133 H



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды