•
To stop the movement of the linkage, release the lift/lower switch to the
centre position or release the mudguard push button.
The linkage has to be activated again every time the lift/lower switch has
been used.
3.12.7
Lift/lower indicator lights
The indicator lights indicate when the lower links are moving.
1
2
AUTO
AUTO
MIN
MAX
P
GUID-0AE08852-A476-4502-B6A5-AEB0D604E74D
1. Lift indicator light
2. Lower indicator light
Lit indicator light indicates that the rear linkage is being used.
•
The lift indicator (red) is lit when the lower links are lifting.
•
The lower indicator (green) is lit when the links are lowering. The lower
indicator light is lit also when rear linkage is set to floating position.
3.12.8
Setting the lowering speed
The needed lowering speed depends on the type of implement used. A slow
lowering speed must be used with heavy and sensitive implements. The setting
does not affect the raising speed.
The lowering speed is independent of the load.
1
AUTO
AUTO
MIN
MAX
P
GUID-3234D227-6C2D-4ECF-B86C-8DBB543FEDF9
1. Lowering speed selector
•
To increase the lowering speed, turn the knob clockwise.
Nine different levels are available.
•
To decrease the lowering speed, turn the knob anti-clockwise.
3. Operation
- 161 -
