4006423-03
Overview
The 720SWK-M Sidewall Co-Linear Terminal Kit allows
approved Valor units listed above only to be vented
using approved 3-inch flexible vent liners to penetrate
an existing masonry solid-fuel burning fireplace and
connect to 720SWK-M horizontal termination rather than
a vertical termination at the top of the chimney.
Use of this kit requires the vent collar slider plate to be
replaced with a vent slider plate having no restrictor
(4001133), supplied with this kit except where more than
10’-0” vertical vent run.
Kit Contents
• Sidewall
terminal
• Vent slider plate with NO restrictor 4001133
Sidewall terminal
Front
Vent slider plate with NO
restrictor 4001133
Rear
12”
12”
8-1/2”
3”
intake
3”
exhaust
©2022, Miles Industries Ltd.
Kit content
This kit must be installed or serviced by a
qualified installer, service agency or gas
supplier. These instructions are to be used
in conjunction with the main installation
instructions for the above listed models.
720SWK-M Sidewall Co-Linear Terminal Kit
Use with Valor models G3 739M and 739V Fireplaces ONLY
INSTALLATION INSTRUCTIONS
720SWK-M
WARNING
If these instructions are not followed
exactlly, a fire or explosion may result
causing property damage, personal
injury or loss of life.
Please leave this manual with the homeowner.
