L I G H T W E I G H T E L E C T R I C I R O N
OPERATION DRY IRONING
Keep iron on heel rest insert plug pin in wall socket &
make mains supply ‘ON’.
Set Temprature regulating knob for desired fabric
(./../...) & Indicating light will glow. Wait for indicating
light to go off .
This Indicates that iron is ready for ironing since desired
temperature is achieved.
* Read this garment lable and follow the manufacturer’s
ironing* instruction that are often shown by symbols
similar to the following
Please ensure that while replacing power supply cord an
insulation sleeve of fiber glass or equivalent material has
to be used over & above cabel insulation.
If the supply cord is damaged, it must be replaced by
manufacturer, its service agent or similarly qualified
person in order to avoid hazard.
Care Maintenance
Before cleaning Remove the Plug from wall socket and
allow iron to cool down Suffi
ciently.
One can wipe it with damp cloth and then dry cloth.
Do not use thinner /solvent for cleaning.
Check regularly whether mains cord is safe to use.
Note
POWER SUPPLY : 230 v 50 hz AC with Earthing
WATTAGE : 750 watts
TEMPERATURE : Manually adjustable control thermostate
You are now a proud owner
of the finest Iron.
Synthetic, Nylon
MIN
MIN
I
II
III
MAX
MAX
Silk, Polyster, Rayon
Wool
Cotton
Linen
IS: 366
CM/L 9140566
SAFETY
IS: 302-2-3
CM/L 9139480
