C/ Polígono Comarca II Calle F, 14
31191 Barbatáin, Spain
Tlf: (+34) 948 07 31 55
HOW TO INSTALL VALIRYO BODY DRYER IN NORTH AMERICA
This document is a user guide. It does not explain how to do the installation by a
user, since the electrical installation must be done by a specialized professional.
All electrical installations must be carried out under the conditions set by the
NEC.
•
Introduction
Most appliances in North America must to be connected to 110
–
120 V. That limitates the
power of the appliances to approximately 1700 W.
This power is not enough for several domestic appliances and the connection to the power
must be different.
Valiryo is rated with 2800 W power. It must be connected to 220
–
240 V.
•
Installation requirements
In order to have an installation as secure as possible, the installation must follow the
requirements of NEC.
-
240 V outlet with GFCI installed
-
you need to connect Valiryo to your home´s electrical network permanently. We
advice you to contact a professional installer. In USA is common to have a 240 V outlet
in every home, so you just need to look for it and connect Valiryo to this electrical grid.
-
Usually, electrical power in North America is supplied with three wires.
o
Black wire: +120 V hot wire
o
Red wire: -120 V hot wire
o
White wire: 0 V neutral
The connection has to be done between the two hot wires.
Home
network
+120 V hot wire
Black
connect
Black
Valiryo’s wire
-120 V hot wire
Red
connect
White
Valiryo’s wire
0 V neutral
White
Do not connect
•
Installation steps
1.
Install the 240 V circuit breaker in the circuit panel.
