GETTING STARTED
Press the “DRUM” button in any interface to turn on the drum.
After the drum is turned on, a symbol will be displayed on the
right side of the main interface to show the drum machine is
active.
Press and hold the DRUM button to enter the drum menu.
Drum Machine
Quick access knob 1 adjusts the DRUM style. Quick access
knob 2 adjusts the DRUM BPM from 40-250. Quick access
knob 3 adjusts the DRUM volume from 0-99. Turn the PARA
knob to switch the DRUM genre. Press the PARA button to
play/stop the drum.
LOOPER Function
Simultaneously
hold two footswitches until the LOOPER menu
appears.
The progress bar at the top will be shown in red during
recording and overdubbing. It will be shown in blue in play
mode.
Quick access knob 1 adjusts the loop recording level from 0-99.
Quick access knob 2 selects between setting the loop before
(Pre) or after (Post) your e ects chain.
In Pre mode, the looper will record mono audio without any
NOTE:
You can exit the LOOPER by pressing the EXIT button. The function of the footswitches in this interface
，
tap footswitch [-] to record / play/ overdub, tap footswitch [+] to stop, hold to clear.
Simultaneously
hold two footswitchs to exit.
6
You can use the built in expression pedal to control various
GP-100 parameters.
Some GP-100 preset patches have been set up to use the built
in expression pedal. These can be used without any further
EXP Pedal
NOTE
The built-in expression pedal also functions when it is turned o . It controls the output volume or input
volume of the GP-100, depending on the where it is positioned in the e ect chain.
setup. Refer to the expression pedal setting section to set the expression pedal.
To activate the built-in expression pedal, press the upper side of the pedal all the way down. When
the built-in expression pedal is on, an icon will show up on the Main Display screen to indicate it is on:
e ects, up to 90 seconds.
In Post mode, the looper will record stereo audio with e ects, up to 45 seconds.
Quick access knob 3 adjusts the loop playback volume from 0-99.
