Valeton CP-200, Руководство пользователя

Страница: 8 / 53

DRUM
LOOPER
In the Main Display screen, hold [Ctrl] footswitch to enter Looper.
*Note:
Sync requires the margin of error to be under 50ms, otherwise the sync would not function normally.
Screen Introduction
DRUM
ON
Press DRUM
for drum play/stomp
Use PARA knob to
select a genre/stryle
Genre Style
BPM Volume
Sync
ON
Rock
Funk
Blues
Pop
Jazz
Electronic
World
Metro Classic Rock 1
Classic Rock 2
Classic Rock 3
Classic Rock 4
Classic Rock 5
Classic Rock 6
Hard Rock 1
Hard Rock 2
LOOPER
Empty
BANK REV DRUM TAP
Undo Redo Exit
Rec VOL
Pre/Post Pre
Play VOL
Turning PARA knob on this page to switch current patch,
clicking PARA knob to access more options.
When double
options are provided in the footswitch function display, the
left corresponds to tap and the right corresponds to hold.
Recording Playing Recording
recording-red playing-green overdubbing-blue
Ÿ
Rec VOL: Change the recording volume of the looper;
Ÿ
Pre/Post: Change the position of the looper in the e ects chain, when setting to “Post”, the recording time will be
cut to half.
Ÿ
Play VOL: Change the volume of the looper when playing back;
Ÿ
Recording Time: When “Undo/Redo” are not required, you can select up to 180s recording time.
Ÿ
Sync*: Synchronize the drumbeat to the timeline of the looper. When activating the looper and playing the drum,
the audio will adjust in a brief period of time to match with the drumbeat.
Ÿ
Auto Rec: Turn on/o the auto-recording, when activating auto-recording, the GP-200 will not immediately start to
record until certain level of input signal is perceived..
Footswitches function di erently in the LOOPER interface than in the Home Screen, and their default functions are set below:
Footswitch
FS 1
[-]
FS 2
[+]
FS 3
[CTRL]
FS 4
[TAP]
FS 5
[A]
FS 6
[B]
FS 7
[C]
FS 8
[D]
Function
Tap
Bank
1/2 Speed DRUM Tap Tempo Undo
Record/Playback
Stop
Back
Hold Reverse
/
Tuner Redo Clear
Ÿ
Turn Quick Access Knob 1 to change the tempo of the
drum, ranged from 40-250 BPM.
Ÿ
Turn Quick Access Knob 2 to change the volume of the
drum, ranged from 0-100;
Ÿ
Turn Quick Access Knob 3 to synchronize the drum
tempo with the patch tempo.
Ÿ
Click “Back” button to exit Drum menu.
After the drum is turned on, a symbol will
be displayed on the right side of the
main interface to show the drum
machine is active.
Press the “DRUM” button to turn on the drum, hold it to enter the DRUM menu.
Turn PARA to switch genres, click PARA to switch Genre
and Style.
GP-200 includes 100 drum patterns (check the Drum
Patterns list for details)
6