Valeport SWiFT, Руководство по эксплуатации

Страница: 28 / 57

Operation
©
2021
– Valeport Ltd
Page | 24
6.6.2 Continuous Mode
In Continuous mode a set of observations will be recorded at a rate of 1Hz. Data will be recorded
from the moment the Instrument is set to work and will continue until the Instrument is interrupted.
In Continuous Mode -
do you require a valid GPS fix
before starting data collection?
Once the unit is placed into run mode, either by turning the SWiFT on, or sending a run command:
.
the following criteria must be met before logging will start:
•
A Valid position has been obtained if the 'Require GPS fix before logging' option is ticked
or
•
If the 'Require GPS fix before logging' option is not ticked as soon as the SWiFT is turned on
and set to work.
Observations will be recorded at 1 Hz in continuous mode.
In a SWiFT this 1Hz recorded value is the average of a 32Hz observation period for each sensor.
Logging is stopped by turning the instrument off or Interrupting it with a # character.