Valeo spheros thermo 230, Руководство по ремонту

Страница: 53 / 71

901
Thermo 230 / 231 / 300 / 301 / 350 9 Repair
9 Repair
9.1 General
This section describes the repairs that may be performed
on the heaters
Thermo 230, 300 and 350 when removed.
Any further disassembly will void the warranty.
For re-assembly only components of the proper spare part
kits are to be used.
The following components may also be replaced with the
heater installed unless restricted space prevents access:
– temperature limiter
– temperature sensor
– combustion air fan
– burner
– igniter box
– flame sensor
– combustion chamber
NOTE:
Symbol tightening torque value:
Identifies in graphics parts (eg nuts, bolts)
that are to be mounted with a specific tigh-
tening torque. The torque values are shown
at the symbol and are binding.