Valcom VIP-9895, Быстрый старт

Страница: 2 / 3

2 947534

Connect RJ45 from network to Ethernet jack
on main circuit board (“C” in photo). Power
over Ethernet (PoE) is required. If PoE is
not available from the switch, an inline
power injector will be required.

Reconnect wiring to circuit board socket
(“A”) and relay connection screw terminals
(“B”). Secure speaker panel to case with 6
tamper-resistant screws.

Install top.
SETUP
Information specific to your application will need
to be programmed into the Call Station using a
computer. The PC used for programming
should be connected to the same subnet as the
Call Station. Setup will be done using the IP
Solutions Setup Tool. Download the latest
version of the free IP Solutions Setup Tool from
the Valcom web site at
www.valcom.com/vipsetuptool.
TECHNICAL ASSISTANCE
Assistance in troubleshooting is available from
the factory. When calling, you should have a
VOM and a test set and call from the job.
site. Call (540) 563-2000 and press 1 for
Valcom Technical Support, or visit our website
at www.valcom.com.
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in
Roanoke, VA. Should repairs be necessary,
attach a tag to the unit clearly stating company
name, address, phone number, contact person,
and the nature of the problem. Send the
unit to:
Repair and Return Dept.
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019-5056
WARRANTY
Warranty information may be found on our
website at www.valcom.com/warranty.
VIP-9895 BASE