1
947574
Issue 1
VIP-422A-IC
InformaCast
®
Compliant
LAY-IN TALKBACK IP CEILING SPEAKER
INTRODUCTION
The VIP-422A-IC is an InformaCast Compliant
Lay-In Talkback IP Ceiling Speaker enable voice
access to a single zone of paging over an IP-based
network. This allows a page zone extension
anywhere on the network. The speaker output level
is controlled by the InformaCast server. The lay-in
ceiling speaker grille is made of steel with a white
baked enamel finish. The VIP-422A-IC replaces a
2’ x 2’ ceiling tile. Power is provided to the unit via
a Power over an Ethernet (PoE) switch meeting the
802.3af specification.
SPECIFICATIONS
Access Methods
Singlewire InformaCast Server
SIP
– enabled telephone system
Valcom M Cast Page Group
Features
RJ-45 network connection
Power over Ethernet (PoE) 802.3af compliant
High Efficiency Class-D Amplifier
Environment
Temperature:
0 to +40° C
Humidity:
0 to 85% non-precipitating
These products are intended for use with a UL
Listed power source marked “Class 2” or “LPS”
rated 24VDC, or 48VDC (PoE).
PoE and all interconnected ITE are intended for
intra-building.
Dimensions/Weight
23.75
” L x 23.75” W x 3.75” D
(60.33 cm) x (60.33 cm) x (9.53 cm)
Weight: 5.5 lbs. (2.49kg)
Precautionary Designations
WARNING-To Reduce The Risk Of Fire Or
Electric Shock. Do Not Expose This
Apparatus To Rain Or Moisture.
• AVERTISSEMENT - Afin de réduire les
risques d'incendie ou de décharge
électrique, évitez d'exposer le système à la
pluie ou à l'humidité.
Apparatus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.
•
L’appareil ne doit pas être exposé à des
égouttements et éclaboussures et aucun
Objet Rempli de liquide, comme vase, ne
doit être placé sur l’appareil.
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates uses,
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
