Issue 1
1
947103
CAUTION: To reduce the risk of electric shock,
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
VIP-142
High Power IP Talkback Paging Horn
INTRODUCTION
The VIP-142 IP Paging Horn is a weather-
resistant, high-efficiency horn supporting
multiple audio and control protocols, all
delivered via a PoE-enabled IP network. A
separate microphone facilitates full-duplex
talkback communication. The high-impact
Polycarbonate construction resists the
deteriorating effects of outdoor installation.
SPECIFICATIONS
Access Methods
•
SIP telephone system
•
Valcom M Cast Page Group
•
PBX, FXO Port w/VIP-811A
•
POTS telephone set w/VIP-811A
•
PBX, FXS Port w/VIP-821A
Features
•
Indoor / Outdoor use
•
High Impact Polycarbonate Housing
•
Omni-Directional Mounting Base
•
Built-in Microphone
•
SIP & Multicast Enabled
•
Power over Ethernet (PoE) 802.3af and
802.3at (PoE+) compatible
•
Remote Management & Monitoring
Dimensions / Weight
•
11.75” H x 10.0” W x 11.0” D (29.8cm H x
25.4cm W x 27.9cm D)
•
4.3 lbs. (1.95 kg)
Audio Codecs
•
G.722, G.711 (uLaw, aLaw)
Frequency Response
•
350 Hz to 7kHz
Audio Dispersion
•
120° Horizontal
•
90° Vertical
Nominal Power Requirements
IEEE 802.3af (PoE) Class 3
IEEE 802.3at (PoE+)
Class 4
These products are intended for use with a UL
Listed power source marked “Class 2” or “LPS”
rated 24 Vdc, or 48 Vdc (PoE).
PoE and all interconnected ITE are intended for
intra-building.
Environment
Temperature:
- 20° to +50° C
Humidity: 0 - 95% non-condensing
