Issue 2
1
947966
Page
Out
Valcom Page
Control
(Tip/A)
(Ring/B)
(-24VDC)
(Gnd)
Valcom –24VDC
Power Supply
One-Way
Amplified
Speaker
V-1052C
INSTALLATION INSTRUCTIONS
INTRODUCTION
The interior wall speaker, the V-1052C, is a 8”
Speaker/Amplifier Assembly capable of
reproducing paging as well as back ground
music. This speaker has an externally accessible
volume control located behind the grille and is
screwdriver adjustable. The enclosures are made
of steel with a durable powder coated finish. The
color of the enclosures can easily be changed to
match any decor. A cloth covered detachable
grille is included. The speaker requires -24VDC,
50mA (1 power unit).
MOUNTING
Remove the screw holding the mounting bracket
to the enclosure. Mount the bracket using
appropriate hardware such as #8 pan head
crews. After making the required connections,
reattach the enclosure to the mounting bracket.
INSTALLATION
Typical Connections
NOTE: Do not connect this speaker directly
to a 25/70/100 Volt amplifier as damage to
both the amplifier and speaker may occur. A
V-1095 may be used to allow the use of
Valcom self-amplified speakers on 70 Volt
speaker lines.
V-1052C
Amplified Wall Mount Speaker
Gray w/Black Grille
DIMENSIONS/WEIGHT
•
10.13” H x 12.31” W x 4.63” D
(25.73cm x 31.27cm W x 11.75cm D)
•
Weight: 4.25 LBS (1.91 kg)
COVERAGE
The area covered by a wall speaker is typically
600 square feet
.
Number of Speakers per Audio Run
Wire Run (Feet)
22 AWG
24 AWG
400
800
1600
100
50
25
60
30
15
Number of Speakers per Power Run
1 Watt Interiors
Speakers
22 AWG
24 AWG
30
15
7
200 Feet
400 Feet
800 Feet
125 Feet
250 Feet
500 Feet
