4 947822
R
O
O
2
N/O
N/C
COM
Step 3. Connect the RJ45 cable from the network. This device is powered via
Power over Ethernet (PoE). If PoE is unavailable from the network
Step 4. Program the VIP-172AL using the VIP-102B IP Solutions Setup Tool.
Step 3
S
IGN
AL
O
UT
P
U
T
NETWO
R
K
NETWORK
INTERFACE
VIP-172AL
DOOR PLATE
Step 1. An optional relay output is provided for activating electric door controls,
strike plates, gates, etc. A Normally Open (NO) and Normally Closed (NC)
connection is available. Consult the door equipment manufacturer’s
documentation for connections to their device. The relay can be activated
Step 2. Connect the Door Plate to the Network Interface. If the Door Plate is close
to the Network Interface, a standard Patch Cable may be used to connect
between them (Figure A). For longer distances, the VM-186 RJ45 Junction
Boxes can be used to extend up to 350' between the Door Plate and Network
switch then an inline power injector will be required.
Step 1
Step 2
R
O
O
2
N/O
N/C
COM
350' MAXIMUM DISTANCE
CAT 3/5/6 UTP
VIP-172AL Quick Start Installation
Step 3
VM-186 COLOR CODES - FUNCTION
ORANGE & WHITE/ORANGE - LED
GREEN & WHITE/GREEN - RELAY CONTROL
BLUE & WHITE/BLUE - CALL SWITCH
BROWN & WHITE/BROWN - AUDIO
WHITE/BLUE
BLUE
WHITE/ORANGE
ORANGE
WHITE/GREEN
GREEN
WHITE/BROWN
BROWN
WHITE/BLUE
BLUE
WHITE/ORANGE
ORANGE
WHITE/GREEN
GREEN
WHITE/BROWN
BROWN
VM-186
RJ45
BROWN
BLUE
VM-186
RJ45
BROWN
BLUE
WHITE/BLUE
WHITE/ORANGE
ORANGE
WHITE/GREEN
GREEN
WHITE/BROWN
BROWN
WHITE/BLUE
BLUE
WHITE/ORANGE
ORANGE
WHITE/GREEN
GREEN
WHITE/BROWN
BROWN
BLUE
S
IGN
AL
O
UT
P
U
T
NETWO
R
K
NETWORK
INTERFACE
VIP-172AL
DOOR PLATE
Step 2
Step 1
by pressing the # key on the answering telephone.
Interface (Figure B).
FIGURE A
FIGURE B
350' MAXIMUM DISTANCE
Figure 1. Quick Start Installation
