background image

 

 

1 947730 

ISSUE 1

 

 
 

VIP-480L-IC InformaCast® Compliant 

IP Paging Horn

  

 

 

INSTALLATION 
Mounting (VIP-LLE)

 

The VIP-LLE Network Extender is designed for wall 
or shelf mounting and must be within 300 feet of the 
network switch. 
 

Shelf: 

Provided with the VIP-LLE Network Extender 

are four rubber stick on pads.  Peel pads off their 
carrier backing and place at the four corners of the 
bottom of the unit. 

 
Wall: 

Using the brackets and wood screws 

provided, secure the VIP-LLE Network Extender 
to the wall. 

 

Mounting (horn) 

FLUSH MOUNT 

The cardboard packing material in which the horn is 
shipped also serves as the template for flush 
mounting.  Using the template, draw the speaker 
outline on the wall to be cut.  Make appropriate 
wiring connections and test the speaker for 
operation.  Using appropriate mounting screws (not 
furnished) drill and mount the flange as shown. 
 

UNIVERSAL BRACKET 

Loosen or separate the universal bracket leaves by 
loosening or removing the handle and hardware.  
Using the back leaf as a template, mark the wall 
through the mounting holes. Drill and mount to the 
wall using appropriate screws (not furnished) or 
mount directly to a junction box. 
Mount the T-bracket to the back of the horn as 
shown using the (2) ½ inch screws provided. 
 

“C” CLAMP FOR “I” BEAM MOUNTING 

A “C” clamp is provided with the horn to allow 
mounting to a beam.  Attach the “C” clamp to the 
back of the horn as shown using the (2) ½ inch 
screws provided.  Place the bolt through the hole in 
the bottom of the base to secure the “C” clamp to 
the beam.  It is suggested that the horn be mounted 
to the underside of the “I” beam to provide 
maximum positioning adjustments. 

 

Interconnections 

The only method of powering a VIP-480L-IC IP 
Paging Horn is via a Power over Ethernet (PoE) 
switch or power injector meeting the 802.3af 
specification.  

 

Make all required signal connections before 
connecting to Ethernet switch or power injector 
meeting the 802.3af specification.  Power is 
supplied to the horn assembly via the VIP-LLE 
Network Extender. 

 

Network Connection  

As shown in Figure 1, the LLE Network Extender 
has one RJ-45 network connector on the front 
panel.  Use a standard Ethernet patch cable to 
connect the NETWORK connector of the LLE 
Network Extender to a 802.3af compliant PoE port 
(300 feet maximum distance).  
 

Signal Connections  

As shown in Figure 1 and 2, audio output 
connections are made on the rear panel of the 
LLE Network Extender.  Versions of the LLE 
Network Extender with the color-coded, 8-pin 
screw connector will connect standard CAT-5 
twisted-pair cable from the rear panel color coded 
connector of the LLE Network Extender to the 
supplied VM-186 RJ-45 connector (900 feet 
maximum distance).  Connect RJ-45 connector   
of horn to VM-186 RJ-45 socket.

Отзывы: