MUS0920201
07/10/2014 49
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
4.11. ISOMELT BUFFER
This version is used to connect to a Drum that fills the tank automatically.
The tank has two level sensors and a buffer valve that is optional.
Level sensor
When the level decreases below the sensor, it emits the signal that activates the
Drum pump.
In case of have installed the buffer valve, it activates too the buffer solenoid and
opens the adhesive inlet of the tank
Safety Level sensor
If the level sensor fails and it
doesn’t detect that the tank has enough adhesive,
this level sensor activates an alarm and stops the filling process to avoid the overflow
risk of the tank.
Buffer valve (optional)
If more than one equipment is connected to the same Drum
, it’s
necessary to install the buffer valve to open and close the filling
system of the tank, because the Drum will be always pumping
adhesive
