2-7
ValcoMelton
Section 2 - Safety Information
MS013 - DD-1 Pump Manual (built after 9/06)
If hot adhesive comes in contact with the skin,
, ,
, , do the following:
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Do not attempt to remove heated hot melt adhesive from
the skin. OTHERWISE, SEVERE PERSONAL INJURY
AND DEATH COULD OCCUR.
1.
Immediately immerse the contacted area in clean, cold water.
It is strongly recommended that a
source of clean, cold water be provided
near the hot melt work area.
2.
Cover the affected area with a clean, wet compress and call the
emergency medical response system (such as 911) immediately.
3.
Watch for and treat the subject for signs of shock while waiting
for professional help to arrive.
What to Do if Contact
with Hot Adhesive
Occurs
If adhesive fumes are inhaled, immediately follow these steps:
1.
Take the victim away from the immediate work area.
2.
Provide victim with fresh air.
3.
Call the emergency medical response system (such as 911)
immediately.
What to Do if
Inhalation of
Adhesive Fumes
Occurs
