sTROllER AssEMBlY/OPENING
FIGURE A - AssEMBlING YOUR sTROllER
1. Remove the carton contents carefully. Dispose of any
packaging materials thoughtfully.
2. Release the stroller from the locked position by lifting the
locking handle from locking rivet on the stroller frame.
HINT: You may have to squeeze the stroller legs and
handles closer together first so as to release the tension
on the rivet.
3. standing behind the stroller and holding it by the
handles, allow the wheels to fall forward.
4. With your foot, press down on the primary locking hinge
until the entire frame locks into the open position.
FIGURE B - ATTACHING THE REAR WHEEls
5. Identify the rear wheels by the red brake levers.
6. With the red levers facing to the rear, align the rear
wheel housing with the nylon housing on the rear frame
leg.
7. Insert rear wheel housing onto the rear leg and push
upward until you feel it lock into place.
8. Repeat for other leg.
IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES ARE
SECURELY ENGAGED BEFORE USE.
FIGURE C - ATTACHING THE FRONT WHEEls
9. Insert the front swivel wheel over the housing on the
front leg. Repeat for the other wheel.
10. To fix the front wheels in the non swivel position, turn
the wheel so that the two notches on both housings line
up at the front.
11. Press the swivel lock down firmly until it locks into
place. To unlock, lift the swivel lock with your foot lock to
release.
FIGURE D - ATTACHING THE HOOD
12. Fasten the hood Velcro straps around the top of the
frame (a). Clip the hood clip onto the frame just above
the folding hinge (b) and snap the side down into place
to secure.
13. Repeat for the other side.
14. snap the back of the hood to the corresponding snaps
found on the back of the seat.
A
B
C
D
a
b
CLICK
2
3
4
11
