Vaisala WAT12 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 38

Vaisala WAT12 Скачать руководство пользователя страница 35

Warranty

For standard warranty terms and conditions, see

www.vaisala.com/warranty

.

Please observe that any such warranty may not be valid in case of damage due to normal wear
and tear, exceptional operating conditions, negligent handling or installation, or unauthorized
modifications. Please see the applicable supply contract or Conditions of Sale for details of the

warranty for each product.

Technical support

Contact Vaisala technical support at

[email protected]

. Provide at least the

following supporting information as applicable:

• Product name, model, and serial number
• Software/Firmware version
• Name and location of the installation site
• Name and contact information of a technical person who can provide further

information on the problem

For more information, see

www.vaisala.com/support

Recycling

Recycle all applicable material.

Follow the statutory regulations for disposing of the product and packaging.

33

«
...
33
34
35
36
37
...
»

Содержание WAT12







































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды