Vaisala WAT12, Руководство пользователя

Страница: 17 / 38

Figure 7 Cable shield bent over plastic sleeve and o-ring
WAT12 has 3 I/O connectors
1 X1: For the anemometer cable
2 X2: For the power and signal cable
3 X3: For the wind vane cable
Table 4 I/O connectors
Connector Description
X1 Plug-in connector with screw terminals (5 pcs) for the anemometer cable.
Maximum wire cross section area is 1.5 mm
2
.
X2 Plug-in connector with screw terminals (8 pcs) for the power and signal
cable. Maximum wire cross section area is 1.5 mm
2
.
X3 Plug-in connector with screw terminals (11 pcs) for the wind vane cable.
Maximum wire cross section area is 1.5 mm
2
.
Chapter 3 – Installation
15