manualshive.com logo in svg

Vaisala Indigo 500 Series, Руководство пользователя

Поделиться
Скачать
Vaisala Indigo 500 Series Скачать руководство пользователя страница 69

More information

‣

Opening and closing transmitter cover (page 17)

‣

Connecting to web interface (page 39)

‣

Creating web interface users (page 40)

‣

Logging in to web interface (page 42)

9.5 Troubleshooting

If you have a problem with using the transmitter, check the following tables before contacting
Vaisala. If the problem you have is not listed in the tables, or if the proposed solution does not
fix the problem, contact Vaisala technical support.

If you suspect that the problem is with the probes attached to the transmitter, you can also
check the probe diagnostics and status with the Insight software and Modbus status registers.
For probe-specific register information, see the connected probe's Modbus documentation.

Problem: A power outage occurred.

Possible cause:

Solution:

 

Wait for the transmitter to power up again. This will take some
minutes.
When the transmitter powers up, it will continue to show
measurements just like before the power outage.
To access the web interface again:

1. Check the current IP address of the transmitter on the

touchscreen, at the bottom left corner of the configuration
menu 

.

2. Reconnect to the web interface using the current IP address.

Problem: You cannot access the web interface login page.

Possible cause:

Solution:

The 

Network off/on

 setting on

the touchscreen may be off.

1. Make sure that the 

Network off/on

 setting on the

touchscreen is on.

• Menu path on touchscreen: 

Menu > Transmitter > Network

2. Check the current IP address of the transmitter on the

touchscreen, at the bottom left corner of the configuration
menu 

.

3. Reconnect to the web interface using the current IP address.

If the transmitter's IP address is
assigned via DHCP, the IP
address may have changed, for
example, because the
transmitter has been restarted.

Chapter 9 – Maintenance and troubleshooting

67

Содержание Indigo 500 Series



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды