manualshive.com logo in svg

Vaisala HUMICAP HMP155, Руководство пользователя, Страница: 99 / 102

Поделиться
Скачать
Vaisala HUMICAP HMP155 Скачать руководство пользователя страница 99

Technical support

Contact Vaisala technical support at 

[email protected]

. Provide at least the

following supporting information as applicable:

• Product name, model, and serial number
• Software/Firmware version
• Name and location of the installation site
• Name and contact information of a technical person who can provide further

information on the problem

For more information, see 

www.vaisala.com/support

.

Warranty

For standard warranty terms and conditions, see 

www.vaisala.com/warranty

.

Please observe that any such warranty may not be valid in case of damage due to normal wear
and tear, exceptional operating conditions, negligent handling or installation, or unauthorized
modifications. Please see the applicable supply contract or Conditions of Sale for details of the
warranty for each product.

Product returns

If the product is faulty, these steps help to speed up the return process and avoid extra costs.

1. Read the warranty information.

2. Contact Vaisala technical support and request a Return Material Authorization (RMA) and

shipping instructions. 

Always request the RMA before returning any faulty material.
Provide the failure report as requested.

Recycling

Recycle all applicable material.

Follow the statutory regulations for disposing of the product and packaging.

97

Содержание HUMICAP HMP155







































































































Отзывы:

Нет отзывов