Vaisala HMP80 Series, Руководство пользователя, Страница: 21 / 54

2. Insert the probe connection cable in one of the ports on the bottom of the indicator.
• Note the orientation of the cable connector when inserting it
• Hold the connector in place while turning its locking ring clockwise –
never twist the connector body!
3. Connect the probe to the M12-5F end of the probe connection cable.
When the indicator recognizes the connected probe, it shows a notification on the display
(for example, HMP80 connected ). A probe connected to the leftmost port in the indicator
is labeled on the indicator's display, while the probe in the rightmost port is labeled .
4. To change probes, simply detach the cable from the probe and connect a new probe.
5.3 Measurement location
When taking measurements with the probe, consider the following:
• Verify the operating environment specification of the probe model. The probe head
typically has a much wider operating temperature range than the probe handle.
Chapter 5 – Using probe with Indigo80 handheld indicator
21