Vaisala DRYCAP DMT143, Руководство пользователя

Страница: 58 / 90

• RH offset and gain
• T offset and gain
• Tdf offset and gain
Example (shows default values, no user adjustment done):
l
RH offset : 0.0000
RH gain : 1.0000
T offset : 0.0000
T gain : 1.0000
Tdf offset: 0.0000
Tdf gain : 1.0000
Example (shows that a -1.2 °C Tdf offset has been applied by the user):
l
RH offset : 0.0000
RH gain : 1.0000
T offset : 0.0000
T gain : 1.0000
Tdf offset: -1.2000
Tdf gain : 1.0000
7.8.6 Set User Adjustment Parameters
Use the LI command to set the user adjustment parameters directly. This command is useful
for restoring the desired adjustments, and removing the effects of user adjustment without
having to perform the factory reset.
This command is provided primarily for applying an offset to the Tdf
measurement. Do not adjust the other parameters unless instructed to do so by
a Vaisala Service Center.
CAUTION!
LI
<cr>
After entering the command, you will be prompted to enter new values one at a time. Press
ENTER without giving a value to move to the next parameter.
Example (shows a +0.8 °C Tdf offset being applied):
li
RH offset : 0.0000 ?
RH gain : 1.0000 ?
T offset : 0.0000 ?
T gain : 1.0000 ?
Tdf offset: 0.0000 ?
Tdf gain : 1.0000 ?
DMT143 User Guide M211435EN-J
56