Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 39
0406-066
Figure 15
Open and Closed Port
User Commands
User commands are described in Table 5 on page 40. User commands
are accessible after opening the line with the
open
command. No
password is needed.
The exact format of commands does not have to be remembered, as
the command line interpreter provides interactive support. At each
menu level, pressing ENTER provides an output of the available
menu. Inserting a letter followed by ENTER outputs all commands
starting with that letter. Inserting two letters followed by ENTER
outputs all commands that start with those two letters, etc., until only
the desired command is left. This command is then executed by
pressing the ENTER key.
In addition to the user menu and the user level command set, there is a
second in-depth maintenance and service level menu and command
set, which is intended for more profound system changes and
diagnostics. These advanced level commands are presented in a
separate table (see Table 6 on page 43). The password for this level is
"advanced". The commands on this level should only be used
according to the instructions in this manual.
