Vaisala AWS330 Скачать руководство пользователя страница 169 | Manualshive

Страница: 169 / 298

Vaisala AWS330 Скачать руководство пользователя страница 169

Chapter 6 ______________________________________________________________ Maintenance

VAISALA ______________________________________________________________________ 165

CHAPTER 6

MAINTENANCE

This chapter provides information that is needed in the basic maintenance
of AWS330.

Overall Checking

Check the mechanics and cabling for any damage and corrosion, and
repair if needed. Wipe off or remove excess dirt, dust, sand, or leaves.

- Check signal and main cables, connectors, and connections.

- Check gaskets of the enclosures.

- Check all grounding cables, lugs, and so on.

- Check mechanical assemblies, bolts, nuts, and so on.

- Check the equipment for corrosion. Repair if needed.

CAUTION

Do not open the enclosure under poor conditions, for example, during
rain or with dust in the air. In general, it is not advisable to repair sensors
in the field.

NOTE

Use correct tools of good quality.

«
...
167
168
169
170
171
...
»

Содержание AWS330











































































































































































































































































































Отзывы:

Нет отзывов