manualshive.com logo in svg

Vaisala AWS310-SITE, Руководство по настройке и обслуживанию

Поделиться
Скачать
Vaisala AWS310-SITE Скачать руководство пользователя страница 173

Technical Support

Contact Vaisala technical support at 

[email protected]

. Provide at least the following

supporting information:

• Product name, model, and serial number
• Name and location of the installation site
• Name and contact information of a technical person who can provide further

information on the problem

For more information, see 

www.vaisala.com/support

.

Warranty

For standard warranty terms and conditions, see 

www.vaisala.com/warranty

.

Please observe that any such warranty may not be valid in case of damage due to normal wear and tear,
exceptional operating conditions, negligent handling or installation, or unauthorized modifications. Please
see the applicable supply contract or Conditions of Sale for details of the warranty for each product.

Recycling

Recycle all applicable material.

Follow the statutory regulations for disposing of the product and packaging.

171

Содержание AWS310-SITE

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды