manualshive.com logo in svg

Vaisala AWS310-SITE, Руководство по настройке и обслуживанию

Поделиться
Скачать
Vaisala AWS310-SITE Скачать руководство пользователя страница 115

Check the sensor visually once a year before the wintertime.

1. Check that the sensor lies below the road surface. 

On a very rough road surface, the sensor must lie approximately 3 mm (0.12 in) below
the surface.
On a smoother road surface, the sensor must lie approximately 1 mm (0.04 in) below
the surface.

2. Check the position of the sensor with the installation plate or a spirit level. 

The sensor surface must be in horizontal position so that moisture spreads equally on
the surface.

1

Bitumen

2

Filler sand

3. If the sensor surface is too high, to lower the sensor, grind the sensor surface.

5.17.2 Lowering DRS511

• Screwdriver
• Hammer
• Belt grinding machine or similar
• Sandpaper (roughness 800 recommended)
• Water
• Wet wipe

Chapter 5 – Maintenance

113

Содержание AWS310-SITE

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды