manualshive.com logo in svg

Vaisala AWS310-SITE, Руководство по настройке и обслуживанию

Поделиться
Скачать
Vaisala AWS310-SITE Скачать руководство пользователя страница 106

4. Set the wind direction offset.

a. In the 

General Settings

 parameter set, select 

wdoffset_1

 or 

wdoffset_2

.

b. In the 

Value

 field, type the wind direction offset in degrees.

c. Select 

Save

.

5. Set the wind speed gain.

a. In the 

General Settings

 parameter set, select 

wsgain_1

 or 

wsgain_2

.

b. In the 

Value

 field, type the wind speed gain.

c. Select 

Save

.

6. Set the wind speed offset.

a. In the 

General Settings

 parameter set, select 

wsoffset_1

 or 

wsoffset_2

.

b. In the 

Value

 field, type the wind speed offset in m/s.

c. Select 

Save

.

7. To activate the new configuration, reset the QML data logger. Select 

Maintenance > 

Reset > Immediate

.

5.9 HMP155 Maintenance

Periodic maintenance for HMP155 includes:

• Checking that the probe is securely mounted.
• Checking that the radiation shield and cable are intact.
• Cleaning the radiation shield using a soft, lint-free cloth moistened with mild detergent.
• Changing the probe filter at least once a year.

If the measurement site is exposed to air pollution and dust, the probe filter may
need to be changed more frequently.

• Sending the sensor to Vaisala for calibration once a year or if the sensor readings seem

inaccurate.

5.9.1 Changing HMP155 Probe Filter

Over time, the probe filter becomes contaminated with matter that you cannot remove by
cleaning. When this happens, the response time becomes longer and measurement
accuracy decreases.

AWS310-SITE Configuration and Maintenance Manual

M211828EN-C

104

Содержание AWS310-SITE

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды