Vaillant miniVED VED H 3/3, Руководство по эксплуатации

Страница: 19 / 168

0020323584_00 Installation and maintenance instructions
19
2. Use the frame as a template for de-
termining the drill holes.
3. Make sure that the supplied wall plugs
and screws are suitable for the wall.
4. Secure the frame to the wall using
wall plugs and screws.
4.8 Installing the product
X2
A
B
C
D
1. Check the corresponding input I or
II , which is to be used depending on
the routing of the power supply cable
(
→
Page 16).
2. Guide the power supply cable through
the frame's grommet.
3. Position the heating element at the
base of the frame.
4. Carefully push the heating element
and the front panel towards the frame
until the lock clicks into place.
5. Secure the front casing using the two
screws.
5 Installation
Warning.
Risk of adverse health effects
caused by impurities in the
potable water.
Sealing residues, dirt or other
residues in the pipelines may
adversely affect the quality of
the potable water.
▶
Flush all of the hot and cold
water pipes thoroughly be-
fore you install the product.
Danger!
Risk of scalding and/or dam-
age due to incorrect installa-
tion leading to escaping wa-
ter.
Mechanical stresses in the con-
nection cable can cause leaks.
▶
Make sure that the connec-
tion cables are free from
mechanical stress when they
are installed.