54
Installation and maintenance instructions 0020244997_07
Setting level
Values
Unit
Increment, select, explanation
Factory
setting
Min.
Max.
Auxiliary relay
1
10
–
1 = Circulation pump
2 = External pump
3 = Cylinder charging pump
4 = Extraction hood
5 = External solenoid valve
6 = External fault message
7 = Solar pump (not active)
8 = eBUS remote control (not active)
9 = Anti-legionella pump (not active)
10 = Solar valve (not active)
2
Accessory relay 1
1
10
–
1 = Circulation pump
2 = External pump
3 = Cylinder charging pump
4 = Extraction hood
5 = External solenoid valve
6 = External fault message
7 = Solar pump (not active)
8 = eBUS remote control (not active)
9 = Anti-legionella pump (not active)
10 = Solar valve (not active)
2
Accessory relay 2
1
10
–
1 = Circulation pump
2 = External pump
3 = Cylinder charging pump
4 = Extraction hood
5 = External solenoid valve
6 = External fault message
7 = Solar pump (not active)
8 = eBUS remote control (not active)
9 = Anti-legionella pump (not active)
10 = Solar valve (not active)
2
Contact details
Phone number
–
0-9
–
End the installation assistant?
–
–
–
Yes, No
–
¹
Fault lists are only displayed, and can only be deleted, if faults have occurred.
C
Overview of diagnostics codes
Note
Since the code table is used for various products, some codes may not be visible for the product in question.
Code Parameter
Values or explanations
Factory
setting
Own setting
D.000 Heating partial load
Adjustable partial heat load in kW
Auto: Product automatically adjusts max. partial load to
current system demand
Auto
D.001 Pump overrun: Heating
1 to 60 min
5 min
D.002 Max. anti-cycl. time: Heating
2 to 60 min
20 min
D.003 Outlet temperature actual value
In °C
Not ad-
justable
D.004 Cylinder temperature actual value
In °C
Not ad-
justable
D.005 Heating target flow temperature
In °C; the maximum value that is set in
D.071
and is
restricted by means of an eBUS control if such a control
is connected
Not ad-
justable
D.006 Outlet temperature target value
35 to 65
℃
Not ad-
justable