Vahle VKS10 Скачать руководство пользователя страница 52

Страница: 52 / 99

TRANSPORT AND STORAGE

5.1

Safety instructions for transport and storage

NOTICE!

Damage due to improper transport or storage. Improper transport or storage may
cause significant property damage!

►

Storage temperature: 0 °C to +45 °C

►

Storage location: Indoors, dry, no exposure to chemicals.

►

Do not expose to direct sunlight.

►

Exercise caution and observe the symbols on the packaging while unloading the
pieces at delivery or during transport on the facilities.

5.2

Transport inspection

Check the delivery for completeness and transport damage upon receipt!

If any external damage is found:

• Refuse delivery or accept delivery only conditionally.
• Note the scope of the damage in the transport documents or on the carrier's delivery note.

NOTICE!

The delivery may be damaged during transport!

Report all defects as soon as they are found. Claims for damages can only be made
during the applicable period.

►

Document and report the defects found.

5.3

Compact conductor system

Conductor system

• Transport and storage in wooden crates.
• Transport by truck

NOTICE!

Incorrect unpacking can lead to damage!

Improper unpacking may lead to property damage and personal injury.

►

Only handle sections using lifting equipment which allows full-surface support or
at least a three-point support, for example by using a lifting traverse.

5.4

Assemblies and individual parts

All units and separate parts are packaged in cardboard boxes for transport and storage.

Содержание VKS10




































































































Результаты поиска

Содержание VKS10

Отзывы:

Бренды по названию

Популярные бренды

Vahle VKS10, Перевод оригинальной инструкции

Результаты поиска

Содержание VKS10

Отзывы:

Бренды по названию

Популярные бренды