Vahle VCL Series Скачать руководство пользователя страница 48

Страница: 48 / 96

COMMISSIONING

5.1

Safety instructions for commissioning

WARNING!

Risk of injury in case of improper operation!

Improper operation may result in serious injury or property damage.

►

Observe the safety instructions from chapter “2 Safety instructions.”

►

Are all acceptance reports available? (initial startup)

►

Are there no people in the danger zones?

►

Was the assembly performed completely according to instructions?

►

Have excess materials, tools and auxiliary devices been cleared from the danger
zones?

►

Have the electrical system powered up by an authorized electrically trained person
(see chapter “2 Safety instructions”)

WARNING!

Danger to unauthorized persons!

Unauthorized persons who do not meet the requirements described here do not know
the dangers in the respective work area.

►

Keep unauthorized persons away from the work area.

►

If in doubt, speak to people and expel them from the work area.

►

Interrupt the work as long as the unauthorized persons are in the work area.

WARNING!

Risks to due inadequately trained personnel!

Insufficiently qualified persons cannot assess the risks involved in working with the
system and may expose themselves and others to the risk of severe or even fatal inju-
ries.

►

All work must be performed by qualified personnel only.

►

Insufficiently qualified personnel must stay out of the work area.

WARNING!

Risk of injury from falling parts!

In case of improper use (faulty assembly, misuse, failure to perform maintenance,
etc.), there is a risk of parts falling down.

►

Wear a helmet

►

Perform regular maintenance

Содержание VCL Series

































































































Результаты поиска

Содержание VCL Series

Отзывы:

Бренды по названию

Популярные бренды

Vahle VCL Series, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание VCL Series

Отзывы:

Бренды по названию

Популярные бренды