DISASSEMBLY AND DISPOSAL
38
9
DISASSEMBLY AND DISPOSAL
9.1
Preparation for disassembly
• Switch off the system and secure it against switching back on.
• Physically disconnect the entire power supply from the system.
• Loosen and remove all screws.
DANGER!
Danger of life due to electrical current!
Contact with live parts can result in life-threating injuries.
►
Make sure that the components are not live or in tension unauthorized approxima-
tion.
9.2
Disassembly
During disassembly, always observe the information in chapter 2.3.1 .
WARNING!
Risk of death from improper replacement or removal!
Errors during the removal or replacement of components may cause life-threatening
situations or significant property damage
►
Observe the safety instructions before beginning any removal work.
CAUTION!
All accessories must be checked for wear.
Only defect-free parts may be reused.
►
Use only genuine VAHLE spare parts.
9.3
Disposal
When the system reaches the end of its useful life, the system must be dismantled and disposed of in an en-
vironmentally sound manner in accordance with the valid local regulations and laws.
NOTICE!
Electronic scrap is hazardous waste. For the disposal, please observe the local valid
regulation and relevant laws in the respective country.
