COMMISSIONING
19
5.2.2
Installation System
Inserting plug connector
Assembly steps:
1. Push two plug connectors halfway into the con-
tact bar / feed terminal.
Connecting contact bars / Connecting feed terminals
Assembly steps:
1. Connect the next contact bar / feed terminal with
the plug connectors, without leaving a gap be-
tween the housings.
2. Repeat the steps until the desired number of con-
tact bars and feed terminals has been reached.
NOTICE!
Observe the polarity indicators on the feed terminals
and contact bars. Mechanical reverse polarity protec-
tion is only available for two consecutive feed termi-
nals.
►
Align the contact bars with the feed terminals so
that the + and - markers are located on the same
side.
Attaching access ramps
Assembly steps:
1. Attach the access ramp at the beginning and the
end.
Содержание SLSM
Страница 2: ......
Страница 32: ...CE Technical Documentation DQS certified in accordance DIN EN ISO 9001 2015 OHSAS 18001 2007...